Vendor Approval RDSO

In House

How we became best among others?

“We built Beautifully with the best possible materials and resources”

- Henry scott, ceo

ISO certification - 9001-2015

ISO Certification - 9001-2015

Additional Detail

Certifying Body: Royal Assessments Pvt. Ltd.
Date of Certification : 28/10/2024
Certification Valid Until: 27/07/2027

Testing Facilities - In House

Sr. No.	Machine Name	Scope/Purpose
1	Hydraullic Test Press Machine	A hydraulic test press machine is used to evaluate the strength, durability, and structural integrity of materials or components by applying high-pressure compressive force. This machine is used for Proof Load Testing, Friction Testing & Rotation Testing of bearings as per IRC Codal provisions.
2	Measuring Tape	A measuring tape is a flexible, marked ribbon used to accurately measure distances, lengths, or dimensions of objects and spaces.
3	Digital Vernier Caliper	A digital vernier caliper is used to take highly precise inside, outside, depth, and step measurements of an object, displaying the readings instantly on a digital screen.
4	Vernier Caliper	A vernier caliper is used to take highly precise linear measurements—such as internal diameters, external diameters, and depths—using a dual-scale system for maximum accuracy.
5	Vernier Depth Gauge	A vernier depth gauge is used to measure the precise depth of holes, slots, recesses, or steps in a workpiece using a narrow graduated blade and a dual-scale vernier system.
6	Telescopic Gauge	A telescopic gauge is an indirect measuring tool used in machining and mechanical engineering to determine the internal diameter of holes, bores, slots, and recesses.
7	Micro Meter	A micrometer is used to take exceptionally precise thickness and diameter measurements of small components using a calibrated screw mechanism.
8	Dial Indicator	A dial indicator is used to precisely measure small linear distances, surface flatnesses, and mechanical runouts by translating tiny axial displacements into a readable needle movement.
9	Hardness Tester	A rubber hardness tester is used to measure the resistance of rubber and elastomeric materials to indentation, determining their structural hardness or flexibility.
10	Ultrasonic Test Machine	An ultrasonic test machine is used to non-destructively detect internal flaws, cracks, and voids within a material or to measure its thickness using high-frequency sound waves.
11	Elcometer / Dry Film Thickness Gauge / Paint Coat Thickness Testing Gauge	A paint coat thickness testing gauge is used to non-destructively measure the depth of dry paint or coating applied to a material's surface without damaging the layer.
12	Tensile Machine	A rubber tensile machine is used to measure the breaking strength, elongation, and elasticity of rubber materials by pulling them apart until they fracture.
13	Compression Set Testing	Compression set testing is used to measure a rubber material's ability to retain its original thickness and elastic properties after being subjected to prolonged compressive stress.
14	Rheometer	A rheometer is used to measure how a fluid or polymer melts, flows, and deforms under applied forces to evaluate its viscosity, elasticity, and curing characteristics.
15	Gravity Balance	A specific gravity balance is used to determine the density and purity of a material by comparing its weight in air to its weight in a reference liquid.
16	Ash Content Testing	Ash content testing is used to determine the total amount of inorganic, non-combustible material remaining in a sample after it has been completely burned at high temperatures.
17	Aging Oven/Hot Air Over	An aging oven or hot air oven is used to accelerate the thermal degradation of materials by exposing them to controlled, elevated temperatures to evaluate their long-term durability and heat resistance.
18	Digital Weighing Machine	A digital weighing machine is used to measure and instantly display the exact weight or mass of an object using electronic sensors.
19	Cycling Test Machine	A cycling test machine is used to evaluate the fatigue life and durability of a component by subjecting it to repeated, continuous cycles of mechanical stress or movement until it fails.
20	Debris Test Machine	A debris test machine is used to evaluate the wear resistance and sealing efficiency of a component by exposing it to abrasive contaminants under simulated operating conditions.
21	Seal Pull-Out Test Machine	A seal pull-out test machine is used to measure the bonding or holding strength of an elastomeric seal by quantifying the force required to pull it out of its retaining groove or housing.
22	Ponding Test	A ponding test is used to evaluate the water resistance, permeability, and long-term durability of materials or coatings by continuously exposing their surfaces to a standing pool of water under controlled conditions.
23	Taper Gauge	A taper gauge is used to quickly and accurately measure the width of slots, gap clearances, hole diameters, and the angle of tapered surfaces.
24	Raughness Tester	A roughness tester is used to measure and quantify the microscopic texture and surface irregularities of a material to ensure it meets specific finish and quality standards.
25	DPT Test Kit	A Dye Penetrant Test (DPT) Kit is used to detect surface defects such as cracks, porosity, seams, laps, and pinholes in welds and steel components during girder fabrication. It is a non-destructive testing (NDT) method that helps ensure the quality and integrity of welded joints without damaging the material.
26	Welding Gauge	A welding gauge is used to check the size, shape, and quality of welds to ensure compliance with fabrication and inspection standards.